Discount Golf Club

Product Description:
This new Fire Forged model is designed for players who seek super forgiveness with hot ball flight. The HS300 face material has the highest strength and lowest elongation of any steel face material the Golfsmith R&D staff has ever tested. HS300 steel has three times the strength of 431 stainless steel. The thin 1.5mm face frees up valuable mass that is repositioned around the extreme perimeter and in two tungsten heel-toe weights. This model has the thinnest face and largest unsupported area of any iron offered by Golfsmith. This gives fairway wood-like forgiveness in an iron. Additionally, the chrome-plated designed provides a long-lasting rich appearance.

Product Description:
XPC Sapphire Iron Head : Designed for female players who want a forgiving iron that is both good-looking and cost-effective, these ultra-playable irons offer medium-wide sole widths with generous lofts and offset. Great for the mid-to-higher handicap player. The raised line surface of the cavity places support throughout the face, yet frees up valuable mass to be positioned around the perimeter for a solid feel and forgiveness on off-center hits. Radius hosel top allows the option of building with a ferrule . Matching steel fairway woods are also available.

Product Description:
Snake Eyes Viper Ti-4 Iron Head : Two removable 2-gram weight screws in the lower heel and toe areas, a hot-feeling titanium face and a deep undercut cavity combine to provide maximum distance and fantastic feel. Placing a heavier weight in the toe port can help promote solid feel and improved stabilization at impact for players who consistently make contact out toward the toe of the clubhead face. The Viper Ti-4 iron will accept the 8-gram tungsten , 5-gram steel and 2-gram aluminum weights. The 8-gram copper, 10-gram steel and 12-gram steel weights are too long for the heel port in the Viper Ti-4 iron.

Product Description:
Alidla HMV III Plus Iron Shaft : Aldila's HMV3 Plus Shaft utilizes their tour-proven HM (high modulus) technology for stability and consistency, but with modified specifications and a low price that better suits the weekend golfer. The more moderate torque values and mid-bend point provide a slightly softer and more forgiving feel that yields optimum launch angles.

Product Description:
The straightest and most forgiving hybrid Nickent has ever created. The 3DX RC Ironwood was developed to complement the 3DX RC irons, but stands alone as an easy-to-hit, high-launching hybrid that performs all over the course. The RC design takes Nickent's flagship 3DX hybrid design to the next level with 25% higher MOI in the same classic shape Nickent is known for.
The tungsten polymer insert moves weight to the extreme heel and toe for optimal forgiveness. The inserts help dampen vibration while weight in each port helps create a more stable clubhead with optimal weight distribution to eliminate the pull hook associated with other leading hybrids.

Product Description:
Snake Eyes 600C Forged Iron Head Snake Eyes 600C iron heads are precision forged from billets of S45C carbon steel to provide optimal feel with supreme accuracy. A new 5 step precision forging process is an improvement over the traditonal 2 or 3 step forging process. The new 5 step process produces more accurate raw forgings, compacts the metal tighter for the elimination of voids and allows for less grinding and polishing to give better consistency from head to head. The 600C forged cavity back irons set up much like a blade at address but allow for better shots on off-center hits. 600C irons are designed to be matched up with the 600B set. Players can choose to place the full set of 600C irons or they can use the long and middle irons from the 600C and short irons from the 600B. The head sizes, offsets, weights and topline appearance all match up no matter where the player chooses to combine the 600C with the 600B (#se2660). Snake Eyes 600C iron heads are the ultimate in looks, feel and playability for players who prefer a clean, quality no frills set of irons. Scorelines and artwork are CNC milled for accuracy.

Product Description:
Snake Eyes 600B Forged Iron Head Snake Eyes 600B iron heads are precision forged from billets of S45C carbon steel to provide optimal feel for a clean muscle back design. A new 5 step precision forging process is an improvement over the traditonal 2 or 3 step forging process. The new 5 step process produces more accurate raw forgings, compacts the metal tighter for the elimination of voids and allows for less grinding and polishing to give better consistency from head to head. The 600B forged irons give a clean, classic set up at address. The beveled tour trailing edge gives supreme playability from a variety of turf conditions. 600B iron heads can be combined with the 600C (#SE2661) set at any point. Many players will choose to play the long and middle irons from the 600C set and then use the short irons from the 600B set. The head sizes, offsets, weights and topline appearance all match up well with one another no matter where the sets are combined. Snake Eyes 600B iron heads are the ultimate in looks, feel and playability for players who prefer a clean, quality no frills traditonal set of irons. Scorelines and artwork are CNC milled for accuracy.

Product Description:

Mizuno Ladies TAVA Irons feature:

Set includes #6 thru #9 irons, plus PW: 50°, SW: 55°

Pocket cavity design for a deep center of gravity

Wide, dual-cambered sole design for reduced digging

Expanded sweet spot area provides more forgiveness on mis-hits

Graphite shaft available in Ladies flex

Golf Pride Lady Dual Durometer

Product Description:
Carbon forged design Unique undercut cavity design Progressive bounce angles Designed for middle and lower handicap players the Golfsmith Tour Cavity Forged Iron heads provide a soft, solid forged iron feel with some increased forgiveness over traditional, compact forged irons. By going to a two-piece design and undercutting the back cavity, the center of gravity (CG) is moved back from face, giving performance previously not possible in a forged design. Repositioning the CG raises the Moment of Inertia (MOI) and increases stability. The S45C carbon steel face and hosel are forged separately from the back cavity to allow for an undercut cavity design, making it the first forged undercut iron available to custom clubmakers. Progressive offset from 6mm in the long irons to 3.5mm in the short irons. Loft and lie may be adjusted +/- 3 degrees. Bounce angles on the set start at 3° on the 3- and 4-irons and progress to 7° on the pitching wedge, allowing for lofts to be made stronger without the fear of creating a negative bounce angle.